|
Amerigear Series F
Flanged Sleeve Flexible Coupling |
 |
| Amerigear
Couplings with Fully Crowned Teeth |
| In
contrast with ordinary gear tooth forms, all three working portions of the tooth are
crowned. The teeth act much like a rocking chair, capable of sliding freely in the axial
direction without digging or gouging the internal mating teeth. Because of this design
advantage, Amerigear offers operational benefits of maximum load-carrying capacity with
minimum size, maximum reliability and long life. |
| F&C
Sizes |
Maximum
Bore-in Square Key |
Torque
In.-Lbs. x 10³ |
| 200 |
.81 |
1.9 |
| 201 |
1.25 |
3.2 |
| 201-1/4 |
1.63 |
7.6 |
| 201-1/2 |
2.25 |
17.0 |
| 202 |
2.75 |
31.5 |
| 202-1/2 |
3.50 |
53.6 |
| 203 |
4.00 |
94.5 |
| 203-1/2 |
4.50 |
142.0 |
| 204 |
5.50 |
214.0 |
| 204-1/2 |
6.25 |
324.0 |
| 205 |
6.63 |
416.0 |
| 205-1/2 |
7.50 |
551.0 |
| 206 |
8.25 |
750.0 |
| 207 |
9.63 |
1,033.0 |
| 208 |
11.25 |
1,500.0 |
| 209 |
12.25 |
1,700.0 |
| 210 |
13.75 |
2,080.0 |
|
|
|
Amerigear Series C
Continuous Sleeve Flexible Coupling |
|
| Advantages
and Features |
- ± 1/2" misalignment for sizes
200-207
- ± 3/4" misalignment for sizes
308-210
- Maximum 60,000,000 in.-lbs. torque
- Original patented fully crowned gear
teeth
- Proven reliability
|
|
| Amerigear
Coupling Series: |
F -
Standard Sleeve
C - Continuous Sleeve
FS & CS - Single Engagement
FM & CM - Mill Motor (Taper Shaft)
FMS & CMS - Mill Motor Single Engagement
FVS & CVS - Vertical Single Engagement
FA & CA - Axial Travel
FAS & CAS - Axial Travel Single Engagement
FE - Extended (Spacer)
FL & CL - Continuously Lubricated
FEL - Extended, Continuously Lubricated
FR - Rigid
FD & FDC - Disconnect (Cut-out)
FB & CB - Brake Drum
FI - Insulated
FPH - FPH - Shear Pin
FI - Insulated
FPH - Shear Pin
FSPH - Shear Pin Single Engagement |
|
|
Amerigear®
